As a member of decorative materials, aluminum panels are becoming increasingly important in the decoration industry. Although aluminum panels have excellent performance, they still require maintenance. What should be noted during the maintenance of aluminum panels? Good maintenance methods can greatly extend the lifespan of aluminum panels. In addition, after maintenance, the surface of the aluminum panel will not only shine but also highlight the excellent performance of the aluminum panel. Today, I will briefly introduce the daily maintenance of aluminum panels.

Aluminum panel manufacturer: Daily maintenance of aluminum panels

First, when the temperature is around 70 degrees, aluminum panels can deform. Heating above 100 degrees will cause them to soften, so it is important to avoid using them above 100 degrees.

Second, for small scratches on the aluminum panel, you can directly wipe them with a small amount of toothpaste using tissue paper or a cloth. For larger scratches, do not use sandpaper to grind the aluminum panel. If you use sandpaper, the surface will be scratched and it will get worse.

Third, aluminum panels should be wiped with a soft cloth. Do not use any cleaning agents that contain granular substances. Do not use any chemical products for cleaning.

Fourth, aluminum panels are easily damaged, so care should be taken to protect the surface during handling.

Fifth, aluminum panels have a large thermal expansion coefficient, so temperature changes should be considered during installation or fixing, leaving room for expansion.

Aluminum panel manufacturer: Welding precautions for aluminum panels

1. Welding should be done in one go, and secondary welding should be avoided as much as possible, as it can easily cause deformation of the aluminum panel.

2. The torch flame should not be too long; it should be heated with a small flame, otherwise the dispersant aluminum panel may easily melt.

3. The welding time should not be too long, as the melting point is too low. If the time is too long, it can easily lead to melting or thinning of the aluminum panel wall, causing leakage during pressure. The importance of welding is twofold: it achieves shaping and also serves a fixing function to prevent deformation of the aluminum panel during use and transportation.

Aluminum panel manufacturer: Main characteristics of aluminum panels

I believe everyone is quite familiar with the term aluminum panel in daily life. But perhaps you do not know other characteristics of aluminum panels? Here, I will introduce three lesser-known features of aluminum panels.

1. Fire resistance: Aluminum panels are non-combustible. Early aluminum-plastic panels were not fire-resistant. However, with the continuous development of aluminum-plastic panel technology, fire-resistant aluminum-plastic composite panels have been produced by adding non-toxic flame-retardant materials to PE, greatly improving their fire resistance, fully meeting the fire protection needs of projects.

2. Lightning resistance: It is understood that a certain company in Germany conducted lightning resistance tests on two materials in a military laboratory, and the results showed that both aluminum-plastic panels and aluminum panels' curtain wall connection methods can completely prevent lightning strikes at the moment of a strike; when lightning strikes continuously, it is easy to melt at the lightning strike points on the metal panel or surface. From this perspective, aluminum panels have lightning resistance.

3. Residual value: Aluminum panels have a certain residual value, so please cherish their use.

Curtain wall aluminum panel manufacturer: Here to introduce how to purchase curtain wall aluminum panels

Aluminum panel manufacturer: Construction methods for aluminum panels

Return to List

Focus News

Talk about the lightning protection features and fire safety characteristics of curtain wall aluminum panels.

The characteristics of lightning protection for curtain wall aluminum panels have been a topic of ongoing debate in the industry. Manufacturers of fluorocarbon coated aluminum panels have found that people often assume aluminum panels are made of pure aluminum, which has better conductivity. Regarding this issue, a test was conducted in a biological laboratory in Germany using two types of raw materials to test their resistance to lightning strikes. The results showed that at the moment of a lightning strike, regardless of whether aluminum composite panels or aluminum single panels were used, the curtain wall interface method could completely prevent electric shock. When subjected to lightning current, melting can easily occur at the lightning strike points on the metal or metallic surface, while plastic aluminum panels are mixed, providing relatively better lightning protection.

Jan 17,2023

What should be noted for the daily maintenance and repair of exterior aluminum-plastic panels?

Aluminum-plastic panels, also known as metal composite panels, are a composite material made of aluminum and high-density polyethylene, with high-pressure polyethylene serving as the core and spray-coated aluminum alloy as the surface material. Aluminum-plastic panels have many excellent characteristics in their applications, such as good decorative art, weather resistance, corrosion resistance, impact resistance, fireproofing, waterproofing, sound insulation, and thermal insulation, making them very effective in various industrial and daily life applications. However, all types of panels require regular maintenance. Below, we will introduce what to pay attention to in the daily maintenance of aluminum-plastic panels!

Jan 07,2023

The following introduces the thickness requirements and characteristics of fluorocarbon aluminum-plastic panels.

Generally, when fluorocarbon aluminum-plastic panels are used as wall panels, the thickness of the wood does not need to be too emphasized, as there is a layer of wall blocking it. At this time, more consideration should be given to the application effect of the architectural curtain wall aluminum-plastic panels, such as measuring the total width of the wall to choose the total width of the architectural curtain wall aluminum-plastic panels, making it more aesthetically pleasing. As long as it ensures beauty and practicality, more people will choose architectural curtain wall aluminum-plastic panels.

Dec 28,2022

Address: No.33, Wusha Section, Shunfan Highway, Daliang Street, Shunde District, Foshan City, Guangdong Province

Telephone:86-757-22803888

SAF Coolest v1.3.1.2 设置面板GAGSX-ZGYF-JFSAE-AEQ

图片ALT信息： Kastar Group

违禁词： First, best, first-class, leading, unique, king, leader, leader, extreme,

无数据提示

Sorry, the current part is being updated, please pay attention!

You can view other columns or return toHome Page

Aluminum panel manufacturer: Daily maintenance of aluminum panels

SAF Coolest v1.3.1.2 设置面板GAGSX-ZGYF-JFSAE-AEQ

无数据提示

V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用