The fireproof aluminum-plastic panel contains almost no other alloys in the aluminum, has a high aluminum content, and is easy to process, making it relatively inexpensive. Aluminum alloys with other metals are not easy to process, have much higher strength, and therefore are more expensive. The ultra-peelable fireproof aluminum-plastic panel uses a new process to improve the critical technical indicator of peel strength to a good state, correspondingly enhancing the flatness and weather resistance of the fireproof aluminum-plastic panel.

This material is easy to process aluminum-plastic panels, weighing only about 3.5-5.5 kilograms per square meter, which can reduce the damage caused by earthquakes and is easy to handle. Its superior construction performance allows for cutting, trimming, planing, and bending into various shapes such as arcs and right angles using simple carpentry tools. It can be modified in various ways in collaboration with designers, and installation is simple and quick, reducing construction costs.

1. Excellent fire resistance: The core material of the aluminum-plastic panel is flame-retardant PE plastic, and the aluminum layers on both sides are very difficult to ignite. Therefore, it is a safe fireproof material that meets the fire resistance requirements of building codes.

2. Impact resistance: It has strong impact resistance and high toughness, and the surface paint will not be damaged due to bending. It is resistant to impact and will not be damaged by wind and sand in areas with heavy winds and sand.

Very strong weather resistance: Due to the use of PVDF fluorocarbon coating based on Kynar-500, it has unique advantages in weather resistance. Whether in hot sunlight or cold wind and snow, it will not damage its beautiful appearance and will not fade for 20 years. The coating is uniform and the colors are bright. After chemical treatment and the application of Henkel film technology, the adhesion of the paint to the aluminum-plastic panel is uniform.

The precautions for the construction of fireproof aluminum-plastic panels are as follows:

1. When installing aluminum-plastic panels, they should be stored or installed in a dry and ventilated place to avoid water accumulation, and the ambient temperature should not exceed 70°C. Avoid installation in abnormal environments such as smoke, strong wind and sand, radiation, harmful gases, and chemical environments to ensure normal use.

2. If the edges need to be bent, the stress should be uniform and formed in one go. If bent multiple times, the aluminum panel may break.

3. When used for curved surface decoration, various shapes such as cutting, trimming, and bending into arcs and right angles can be completed using carpentry tools. Apply force slowly to gradually achieve the desired curve, and do not attempt to do it all at once. The bending radius should be greater than 30 cm.

4. The protective film should be removed within 45 days after UV spraying of the aluminum-plastic panel; otherwise, the protective film may age due to prolonged exposure to sunlight, which may lead to glue leakage.

5. If the surface of the fireproof aluminum-plastic panel is contaminated during construction or use, it can be gently cleaned with a neutral detergent or alcohol. It is prohibited to use strong acids or strong alkalis for cleaning, as this may damage the panel surface.

6. Fireproof aluminum-plastic panels are divided into indoor and outdoor panels. The surface coatings of the two types of panels are different, which determines their application in different occasions. Indoor commonly used panels have a resin coating on the surface; outdoor aluminum-plastic panels generally use fluororubber coatings with strong aging resistance and UV resistance, which are more expensive. Do not use indoor aluminum-plastic panels outdoors, as this will accelerate the aging process and cause discoloration. Special attention should be paid to this.

What is the difference between a fireproof aluminum-plastic board booth and a stainless steel booth?

How to judge the quality of fluorocarbon aluminum panels

Return to List

Focus News

Talk about the lightning protection features and fire safety characteristics of curtain wall aluminum panels.

The characteristics of lightning protection for curtain wall aluminum panels have been a topic of ongoing debate in the industry. Manufacturers of fluorocarbon coated aluminum panels have found that people often assume aluminum panels are made of pure aluminum, which has better conductivity. Regarding this issue, a test was conducted in a biological laboratory in Germany using two types of raw materials to test their resistance to lightning strikes. The results showed that at the moment of a lightning strike, regardless of whether aluminum composite panels or aluminum single panels were used, the curtain wall interface method could completely prevent electric shock. When subjected to lightning current, melting can easily occur at the lightning strike points on the metal or metallic surface, while plastic aluminum panels are mixed, providing relatively better lightning protection.

Jan 17,2023

What should be noted for the daily maintenance and repair of exterior aluminum-plastic panels?

Aluminum-plastic panels, also known as metal composite panels, are a composite material made of aluminum and high-density polyethylene, with high-pressure polyethylene serving as the core and spray-coated aluminum alloy as the surface material. Aluminum-plastic panels have many excellent characteristics in their applications, such as good decorative art, weather resistance, corrosion resistance, impact resistance, fireproofing, waterproofing, sound insulation, and thermal insulation, making them very effective in various industrial and daily life applications. However, all types of panels require regular maintenance. Below, we will introduce what to pay attention to in the daily maintenance of aluminum-plastic panels!

Jan 07,2023

The following introduces the thickness requirements and characteristics of fluorocarbon aluminum-plastic panels.

Generally, when fluorocarbon aluminum-plastic panels are used as wall panels, the thickness of the wood does not need to be too emphasized, as there is a layer of wall blocking it. At this time, more consideration should be given to the application effect of the architectural curtain wall aluminum-plastic panels, such as measuring the total width of the wall to choose the total width of the architectural curtain wall aluminum-plastic panels, making it more aesthetically pleasing. As long as it ensures beauty and practicality, more people will choose architectural curtain wall aluminum-plastic panels.

Dec 28,2022

Address: No.33, Wusha Section, Shunfan Highway, Daliang Street, Shunde District, Foshan City, Guangdong Province

Telephone:86-757-22803888

SAF Coolest v1.3.1.2 设置面板GAGSX-ZGYF-JFSAE-AEQ

图片ALT信息： Kastar Group

违禁词： First, best, first-class, leading, unique, king, leader, leader, extreme,

无数据提示

Sorry, the current part is being updated, please pay attention!

You can view other columns or return toHome Page

What are the advantages of fireproof aluminum-plastic panels?

SAF Coolest v1.3.1.2 设置面板GAGSX-ZGYF-JFSAE-AEQ

无数据提示

V1.3.1 SVG图标库请自行添加图标，用div包起来，并命名使用