language
中国
韩国
韩国
韩国
韩国
韩国
imgboxbg
/
/
/
alubond aluminum composite panel factory teach you how to choose aluminum composite panel

alubond aluminum composite panel factory teach you how to choose aluminum composite panel

(Summary description)1.Alubond aluminum composite panel factory is recommended. Whether the surface of the aluminum composite panel is smooth and smooth, without ripples, bubbling, shelter points, and scratches. 2. Measure. Whether the aluminum composite panel meets the international requirements, the inner wall panel is 3mm, and the outer wall panel is 4mm. 3.Alubond aluminum composite panel factory is recommended to fold. In the corner of the aluminum-plastic panel, it is not PE material or doping that is easy to break. 4. Burn. The intermediate material of the aluminum composite panel, the real PE is completely burned, and the doping makes the fake one have impurities after burning.

alubond aluminum composite panel factory teach you how to choose aluminum composite panel

(Summary description)1.Alubond aluminum composite panel factory is recommended. Whether the surface of the aluminum composite panel is smooth and smooth, without ripples, bubbling, shelter points, and scratches. 2. Measure. Whether the aluminum composite panel meets the international requirements, the inner wall panel is 3mm, and the outer wall panel is 4mm. 3.Alubond aluminum composite panel factory is recommended to fold. In the corner of the aluminum-plastic panel, it is not PE material or doping that is easy to break. 4. Burn. The intermediate material of the aluminum composite panel, the real PE is completely burned, and the doping makes the fake one have impurities after burning.

Information

  1.Alubond aluminum composite panel factory is recommended. Whether the surface of the aluminum composite panel is smooth and smooth, without ripples, bubbling, shelter points, and scratches. 2. Measure. Whether the aluminum composite panel meets the international requirements, the inner wall panel is 3mm, and the outer wall panel is 4mm. 3.Alubond aluminum composite panel factory is recommended to fold. In the corner of the aluminum-plastic panel, it is not PE material or doping that is easy to break. 4. Burn. The intermediate material of the aluminum composite panel, the real PE is completely burned, and the doping makes the fake one have impurities after burning.

alubond aluminum composite panel factory

  5. Plane. When the groove is bent, see if the front side is broken. 6. Drops. Butanone was used to identify the fluorocarbon coating of the exterior wall panel, and xylene was dropped to identify the interior wall panel coating. After 5 minutes, wipe off the reagent to see if the bottom was exposed. 7. Alubond aluminum composite panel factory is recommended to request. It is necessary to produce manufacturer quality inspection reports, quality assurance books, and ISO-9002 international quality certifications. The manufacturers with these are produced by regular manufacturers, which can guarantee product quality, the same price is more than the quality, and the same quality is more than the price!

  alubond aluminum composite panel factory The viscosity of the protective film on the surface of the aluminum composite panel should be determined according to the smoothness of the surface of the material. The surface of the material is smooth and smooth. The viscosity of the protective film should be low. Viscosity should be high. The aluminum-plastic panel should be torn off as soon as possible after the decoration is completed. If the time is too long, the protective film of the aluminum-plastic panel will be weathered and dried and difficult to absorb. You can scrub the surface of the double-layer aluminum-plastic panel protective film with hot water, and then slowly tear it off. Clean up.

Keyword:

Scan the QR code to read on your phone

Cooperative partner

Username used for comment:
客户留言
Description:

Contact us

Foshan Shunde Goldstar Building Decoration Materials Co.,Ltd

Add: No.33 Wusha Shunpan Road, Daliang Street, Shunde District Foshan City, Guangdong of China.

Tel: 86-757-22803888

 

Foshan Shunde Detian Building Materials Co.,Ltd

Add: 2nd of No.33 Wusha Shunpan Road, Daliang Street, Shunde District Foshan City, Guangdong of China.

Tel: 86-757-27330306

E-mail:
goldstar@goldstar-cn.com

 

Post Code : 528308

Website:www.goldstar-cn.com

We adhere to the customer-oriented service concept; we advocate green environmental protection and continue to pay attention to safety

>     GOLDSTAR Group                   >     Culture


>     Product show                            >     News


>     Honor                                        >     Contact us

Copyright © GOLDSTAR Group allright 粤ICP备05041049号  www.300.cn